Enamel remineralization and surface roughness after treatment with herbal-containing toothpastes.

BACKGROUND: Oral care products containing bioactive agents obtained from extracts of plant drugs were launched. This in vitro study investigated the effects of herbal-containing toothpastes associated or not with fluoride to remineralize the enamel after cariogenic challenge with pH cycling. The chemical and physical factors of toothpastes and the enamel surface roughness after brushing were also analyzed. MATERIAL AND METHODS: Sixty bovine enamel blocks were obtained and divided into 3 thirds: intact (untreated), demineralized (artificial caries lesion), and treated (caries lesion, pH cycling, and brushing with toothpastes). Toothpastes containing herbal compounds contained no fluoride [Galla chinensis (GCH)], low-F concentration [D'Or (DOR); Herbal Bliss (HBL)], or a different fluoride type [Elmex Anticaries (EAC)]. The results were compared to NaF-containing toothpastes: 1450 and 5000 ppm. Enamel blocks were brushed with the toothpastes using a pH-cycling model (7 days). The Knoop hardness (25g/10s) of the surface and the longitudinal sections were then evaluated. The percentage of surface hardness recovery (%SHR) was calculated. The enamel surface roughness, pH, particle size, zeta potential, and polydispersity index of toothpaste slurries were also evaluated. Data were statistically analyzed (α=5%). RESULTS: No significance was observed when %SHR was compared (p>0.05). DOR, GCH, and HBL were more effective in remineralizing the enamel subsurface. Significantly higher surface roughness was observed when treated with EAC and GCH (p<0.05). CONCLUSIONS: All toothpastes were able to remineralize the enamel, especially the subsurface, with results equal or better than that of standard toothpastes. Key words:Enamel, hardness, roughness, toothpaste, tooth remineralization.

Influence of Dentin Priming with Tannin-Rich Plant Extracts on the Longevity of Bonded Composite Restorations.

OBJECTIVE: This in vitro study evaluated the influence of bioactive plant extracts as dentin biomodifying agents to improve the longevity of bonded restorations. For that, plant extracts were applied to the dentin surface prior to the adhesive system. MATERIALS AND METHODS: Bovine incisors were ground flat to obtain 2 mm thick slices in which conical preparations were made (N = 10). Tannin-containing plant extracts were applied to dentin before the application of the restorative system, as follows: control group (untreated, CTL), chlorhexidine 0.12% (CHX), mastruz (Dysphania ambrosioides, MTZ), cat's claw (Uncaria tomentosa, CTC), guarana (Paullinia cupana, GUA), galla chinensis (Rhus chinensis, GCH), and tannic acid (extracted from Acacia decurrens, TNA). The push-out bond strength test was conducted (0.5 mm/min). Dentin biomodification was assessed by the modulus of elasticity and mass change in bovine tooth sections (0.5 × 1.7 × 7.0 mm). The dentin staining after extract treatments of dentin slices was compared. The dentin surface wettability was also evaluated by means of the contact angles of the adhesive system with the dentin surface and compared with the untreated control group. Data were subjected to ANOVA/Tukey's test (α = 0.05). RESULTS: The bond strength of the restoratives to dentin was not significantly improved by the plant extracts, irrespective of the evaluation time (p > 0.05). Except for TNA, the elastic modulus of demineralized dentin significantly reduced after treatment with the plant extracts (p < 0.05). The dentin staining correlated with the tannin content of the extracts. The contact angle was significantly reduced when treated with CTC, GCH, and TNA. CONCLUSIONS: The tannin-containing extracts had a questionable effect on the longevity of bonded restorations. The dentin modulus was negatively affected by the extract treatments. Although some of the extracts changed the contact angle, which seems to improve the adhesive monomer permeation, the tannin-rich plant extract application prior to adhesive application was proven to be clinically unfeasible due to dentin staining.

Biomimetic Mechanism of Action of Fluoridated Toothpaste Containing Proprietary REFIX Technology on the Remineralization and Repair of Demineralized Dental Tissues: An In Vitro Study.

OBJECTIVES: This in vitro study aimed to characterize the mineral content and surface and cross-sectional morphology of enamel and dentin tissues treated with a 1450 ppm fluoride-containing toothpaste with REFIX technology. MATERIALS AND METHODS: Bovine enamel blocks (n = 5) were obtained (4 × 4 × 6 mm), demineralized (artificial caries lesion), and treated (pH cycling and brushing with the toothpaste). During the pH cycling, which lasted for 7 days (demineralization and remineralization took 6 and 18 hours, respectively), the enamel was brushed for 5 minutes using an electric toothbrush before being immersed in a remineralizing solution. The dentin blocks were acid-etched for 2 minutes (0.05 M citric acid, pH 1.8) to expose the dentinal tubules (n = 5). Morphological analysis of the dentin was performed immediately and after 7 days of brushing with the dentifrice, and compared with the control group. The specimens were then cross-sectioned. The surface and cross-sectional micromorphology were assessed using scanning electron microscopy (SEM). The elemental analyses (weight%) were determined with an energy-dispersive X-ray spectroscopy (EDS). RESULTS: The toothpaste with REFIX technology remineralized and repaired the surface enamel effectively. The elemental analysis also demonstrated that treating the enamel with the toothpaste formed a silicon-enriched mineral layer on the enamel surface. Elemental analysis of the enamel cross-sections showed that the toothpaste induced a mineral change. The results were also consistent in the dentin, where the dentinal tubules were progressively occluded until there was complete occlusion after 7 days. CONCLUSIONS: We prove the biomimetic mechanism of action of fluoridated toothpaste containing proprietary REFIX technology for obtaining silicon-enriched, remineralized and repaired dental tissues.

Effects of 1450-ppm Fluoride-containing Toothpastes Associated with Boosters on the Enamel Remineralization and Surface Roughness after Cariogenic Challenge.

OBJECTIVES: This in vitro study investigated the remineralization potential of 1450 ppm, fluoride-containing toothpastes containing different active remineralization agents after cariogenic challenge with pH cycling. The enamel surface roughness after brushing and the chemical and physical characteristics of the toothpastes tested were also analyzed. MATERIALS AND METHODS: Fifty-six bovine enamel blocks were obtained (4 × 4 × 6 mm) and divided into three thirds: intact (untreated), demineralized (artificial caries lesion), and treated (caries lesion, pH cycling, and brushing with dentifrices). Seven commercially available fluoride toothpastes (1450 ppm F): three with anti-erosion claims (Candida Professional [CPP], Colgate Total 12 Daily Repair [CDR], Regenerate Enamel Science [RES]); three with desensitizing claims (Bianco Pro Clinical [BPP], Elmex Sensitive [ESS], and Regenerador Diário DentalClean [RDC]); and one standard regular-fluoride toothpaste Colgate Total 12 (CTT) were selected. During pH cycling (demineralization 6 h/remineralization 18 h) for 7 days, the treated third was brushed with the different dentifrices for 10 minutes in a brushing machine before immersion in a remineralizing solution. The Knoop hardness (25 g, 10 second of the surface, and longitudinal section were then evaluated at eight depths (10 to 330 µm). Mean and percentage of surface hardness recovery (% SHR) were calculated. Surface enamel roughness (Ra) was also evaluated. The pH, %weight of particles, zeta potential, and polydispersity index of toothpaste slurries were also evaluated. STATISTICAL ANALYSIS: Data were statistically analyzed (ANOVA/Tukey, 5%). RESULTS: The %SHR of CPP was significantly lower than the others (p < 0.05). The enamel subsurface was more effectively remineralized when treated with BPP, ESS, and RDC. The surface roughness was higher when the demineralized third was treated with CTT, RDC, and RES and after the cariogenic challenge (p < 0.05). For some of the products tested, there was no relationship between surface remineralization and subsurface remineralization. Although toothpastes CPP and RDC present the lowest %SHR means, both products effectively remineralize within the subsurface carious lesion. Regression analysis demonstrated no strong correlations of the enamel surface roughness with the chemical and physical parameters. CONCLUSIONS: Most but not all the fluoride toothpastes were able to remineralize the enamel surface. No specific chemical or physical parameter alone correlated with the surface roughness.

Influence of a propolis-based irrigant solution on gap formation and bond strength of posts bonded to root canal dentin using different resin cements.

This study evaluated the influence of an aqueous propolis-based solution (PROP) on gap formation and bond strength of posts bonded to root canal dentin using resin cements. Endodontically-treated bovine incisors received different irrigation protocols: 1) 2.5% sodium hypochlorite (NaOCl)/17% EDTA/NaOCl; 2) saline solution (NaCl)/EDTA/0.12% chlorhexidine (CHX); 3) NaOCl/PROP/NaOCl; 4) NaCl/PROP/CHX; 5) NaCl/PROP/NaCl. Posts were then bonded with cements: RelyX ARC; Panavia F2.0; or RelyX U200 (n=10). The specimens were cross-sectioned. Gaps were assessed and performed the push-out bond strength test. Surface roughness of dentin fragments was also evaluated. Statistical analysis was performed (5%). RelyX U200 exhibited greater gap-free interfaces. Bond strength varied as a function of cements and irrigation protocols. PROP irrigation had no negative effect on the bond strength (p>0.05). Roughness increased significantly after NaOCl/EDTA/NaOCl, but remained unaltered after PROP irrigation protocols. Propolis-based irrigation protocols do not interfere in the bonding performance of posts cemented to root canal dentin.